A good measure for evaluating operational productivity in companies should avoid two errors — false positives and false negatives. Let us check if the measure of profitability calculated as PBDIT as a percentage of sales meets the criteria. A company improving profitability PBDIT as a percentage of sales (PBDIT%) over the years, is often seen as improving its performance. But can there be a case where a decrease in profitability is actually an improvement – a false negative?To understand this, let us consider a company with two products - A and B, with ‘A’ having a gross contribution margin (i.e. throughput or T, defined as sales minus truly variable costs) of 50%, and B having a <a href="https://www.vectorconsulting.in/en/research-and-publication/blogs/throughput-accounting-an-introduction/">throughput</a> of 10%. Product A has a high value per unit volume, while product B has a low value per unit volume. So product A is for the ‘classes’, while product B is for the ‘masses’. Let us also assume that the company has a very high market share in product A, while, in product B, it is one of the many players in the fragmented market. The financials of the company are as below:<figure class="image"><img style="aspect-ratio:16668/12135;" src="https://backend.vectorconsulting.in/storage/editor_uploads//cg-article-21-img-1-01_1733066461.jpg" width="16668" height="12135"></figure>Driven by an overall ambitious five-year plan for ensuring significant growth of the top line, the company made a business plan to achieve a top line growth target of 50% in the coming year. The operating expenses (OE) of the company are planned at an absolute value of 16 (a growth of about 7% over the previous year, mostly led by an increase in the compensation of the employees, as capacities were in place to manage the growth). However, the year did not go as planned. As the year progressed, the sales from product A were nearly stagnant, while the overall demand for product A in the market declined. The sales team did a great job in retaining the sales at the same level as last year, which means that they gained some market share for product A. The compensating growth came from the low-throughput (low T) product B. The sales of product B went beyond all expectations — it doubled!At the end of the year, the financials of the company are as below: <figure class="image"><img style="aspect-ratio:16668/10015;" src="https://backend.vectorconsulting.in/storage/editor_uploads//cg-article-21-img-2-01-01-01-01-01_1733066472.jpg" width="16668" height="10015"></figure>The company management claimed to have done a great job. They had increased their top line by 50% and showed decent growth in the absolute bottom line as well, which is close to 26% over the previous year. The shareholders received higher dividends than in the previous year. But the profitability of the company has come down. From the perspective of profitability measure, this looks like a dip in performance. But is this so?There has been an impact on profitability due to a shift in the product mix. The percentage of high-throughput (high T) products from total sales has decreased dramatically from 50% of total sales to just 33%. In the future, further growth is expected from product B, as the market share is low, and the market for product B is also growing. On the other hand, the market for high-value products is not growing as much. (At times, a low price point product, with low T margin, becomes a growth driver in emerging markets.)If the growth from low T product is significantly higher than that from high T product, then in future, the percentage contribution of the high T product will reduce further, decreasing the overall profitability of the company.Should one be concerned about this situation? If, traditionally, a company has been operating at a high profitability percentage, there occurs a paradigm shift for managers when low T products drive the overall growth pattern of the company. The paradigm shift takes place from being a predominant ‘high margin–low volume’ player to becoming a predominant ‘high volume–low margin’ player. Evaluating performance by comparing the past can become an issue when the company is also going through a paradigm shift in the business mix. A drop in profitability can be construed as a problem when the past is compared with the present. When the drop in profitability becomes an issue, organizations’ actions include evaluating the product portfolio to enhance profitability. A typical method to carry out the analysis is by allocating all fixed expenses to the product. In such a situation, even a low T product may start showing a negative margin after the allocations. Faced with a product of high volumes and a negative margin (after allocations), it may appear that pruning the product will actually add to the bottom line of the company. If one decides to prune the volumes of low T products to improve the profitability of the company, then it can be useful only when capacity is shared across two products and the capacity is a constraint. (The limitation in capacity can be in sales efforts or production capacity). In such a situation, it makes sense to cut back the low T product and use the limited capacity (sales or production) for high T products. This should be done till one elevates the limitation in constraint capacity (either sales efforts or production). The result will be improved profits and profitability. However, if the capacities and sales channels are different, and neither of them is a limiting factor, then it means that the growth of the low T product is not at the cost of the high T product. There is a problem of lack of growth of the high T product, but it has no relation to the growth of the low T product. The low T product cannot pay the price for the lack of growth of the high T product. The low T product is not the culprit for reducing the profitability. On the contrary, without the low T product, the case would be even worse for the company. In the example, even when the sales of the high T product have not increased, the company’s total T has grown. And it has grown by 16%. At the same time, the growth of OE has been 6%. This means that from a marginal increase in OE, the company has been able to increase the money entering the system (throughput) by 16%. The company has been able to ‘sweat’ its assets to deliver proportionately higher throughput and hence higher profits for the company. It has been more productive than in the previous year. This example clearly shows that the measure of profitability can be misleading and, at times, can compel managers to take wrong decisions for a company that manufactures products of widely varying throughput margins and changing product mix and has ambitious growth plans. It suffers from the second type of error – false negatives (triggering a false alarm of a problem when it is not there). The real measure of operational productivity of a company is not PBDIT%, but the ratio of throughput/ total operating expenses (T/OE). In the example, the company’s T/OE ratio has grown from 2 to 2.2 even when profitability has decreased. As long as the total throughput of the company is growing much faster than the growth of OE, the company is on track to ever-improving productivity and, hence, moving toward becoming an ever-flourishing company.In addition to operational productivity, there are many other measures typically used in organisations as part of cost accounting, which can be misleading. People in an organization behave in the way they are measured. Wrong measurements can lead to erroneous behaviours. Therefore, it is better to use the principles of <a href="https://www.vectorconsulting.in/en/research-and-publication/blogs/throughput-accounting-an-introduction/">Throughput Accounting</a> for internal decision making.

Key Takeaways

PBDIT is often seen as a good indicator of a company's operational productivity. But is it a good indicator? Or does the throughput/total operating expense ratio give a better picture?

Profitability percentage (%)

A good measure for evaluating operational productivity in companies should avoid two errors — false positives and false negatives. Let us check if the measure of profitability calculated as PBDIT as a percentage of sales meets the criteria. A company improving profitability PBDIT as a percentage of sales (PBDIT%) over the years, is often seen as improving its performance. But can there be a case where a decrease in profitability is actually an improvement – a false negative?To understand this, let us consider a company with two products - A and B, with ‘A’ having a gross contribution margin (i.e. throughput or T, defined as sales minus truly variable costs) of 50%, and B having a <a href="https://www.vectorconsulting.in/en/research-and-publication/blogs/throughput-accounting-an-introduction/">throughput</a> of 10%. Product A has a high value per unit volume, while product B has a low value per unit volume. So product A is for the ‘classes’, while product B is for the ‘masses’. Let us also assume that the company has a very high market share in product A, while, in product B, it is one of the many players in the fragmented market. The financials of the company are as below:<figure class="image"><img style="aspect-ratio:4000/2912;" src="https://backend.vectorconsulting.in/storage/editor_uploads//cg-article-21-img-1_1734851746.jpg" width="4000" height="2912"></figure>Driven by an overall ambitious five-year plan for ensuring significant growth of the top line, the company made a business plan to achieve a top line growth target of 50% in the coming year. The operating expenses (OE) of the company are planned at an absolute value of 16 (a growth of about 7% over the previous year, mostly led by an increase in the compensation of the employees, as capacities were in place to manage the growth). However, the year did not go as planned. As the year progressed, the sales from product A were nearly stagnant, while the overall demand for product A in the market declined. The sales team did a great job in retaining the sales at the same level as last year, which means that they gained some market share for product A. The compensating growth came from the low-throughput (low T) product B. The sales of product B went beyond all expectations — it doubled!At the end of the year, the financials of the company are as below: <figure class="image"><img style="aspect-ratio:4000/2404;" src="https://backend.vectorconsulting.in/storage/editor_uploads//cg-article-21-img-2_1734851757.jpg" width="4000" height="2404"></figure>The company management claimed to have done a great job. They had increased their top line by 50% and showed decent growth in the absolute bottom line as well, which is close to 26% over the previous year. The shareholders received higher dividends than in the previous year. But the profitability of the company has come down. From the perspective of profitability measure, this looks like a dip in performance. But is this so?There has been an impact on profitability due to a shift in the product mix. The percentage of high-throughput (high T) products from total sales has decreased dramatically from 50% of total sales to just 33%. In the future, further growth is expected from product B, as the market share is low, and the market for product B is also growing. On the other hand, the market for high-value products is not growing as much. (At times, a low price point product, with low T margin, becomes a growth driver in emerging markets.)If the growth from low T product is significantly higher than that from high T product, then in future, the percentage contribution of the high T product will reduce further, decreasing the overall profitability of the company.Should one be concerned about this situation? If, traditionally, a company has been operating at a high profitability percentage, there occurs a paradigm shift for managers when low T products drive the overall growth pattern of the company. The paradigm shift takes place from being a predominant ‘high margin–low volume’ player to becoming a predominant ‘high volume–low margin’ player. Evaluating performance by comparing the past can become an issue when the company is also going through a paradigm shift in the business mix. A drop in profitability can be construed as a problem when the past is compared with the present. When the drop in profitability becomes an issue, organizations’ actions include evaluating the product portfolio to enhance profitability. A typical method to carry out the analysis is by allocating all fixed expenses to the product. In such a situation, even a low T product may start showing a negative margin after the allocations. Faced with a product of high volumes and a negative margin (after allocations), it may appear that pruning the product will actually add to the bottom line of the company. If one decides to prune the volumes of low T products to improve the profitability of the company, then it can be useful only when capacity is shared across two products and the capacity is a constraint. (The limitation in capacity can be in sales efforts or production capacity). In such a situation, it makes sense to cut back the low T product and use the limited capacity (sales or production) for high T products. This should be done till one elevates the limitation in constraint capacity (either sales efforts or production). The result will be improved profits and profitability. However, if the capacities and sales channels are different, and neither of them is a limiting factor, then it means that the growth of the low T product is not at the cost of the high T product. There is a problem of lack of growth of the high T product, but it has no relation to the growth of the low T product. The low T product cannot pay the price for the lack of growth of the high T product. The low T product is not the culprit for reducing the profitability. On the contrary, without the low T product, the case would be even worse for the company. In the example, even when the sales of the high T product have not increased, the company’s total T has grown. And it has grown by 16%. At the same time, the growth of OE has been 6%. This means that from a marginal increase in OE, the company has been able to increase the money entering the system (throughput) by 16%. The company has been able to ‘sweat’ its assets to deliver proportionately higher throughput and hence higher profits for the company. It has been more productive than in the previous year. This example clearly shows that the measure of profitability can be misleading and, at times, can compel managers to take wrong decisions for a company that manufactures products of widely varying throughput margins and changing product mix and has ambitious growth plans. It suffers from the second type of error – false negatives (triggering a false alarm of a problem when it is not there). The real measure of operational productivity of a company is not PBDIT%, but the ratio of throughput/ total operating expenses (T/OE). In the example, the company’s T/OE ratio has grown from 2 to 2.2 even when profitability has decreased. As long as the total throughput of the company is growing much faster than the growth of OE, the company is on track to ever-improving productivity and, hence, moving toward becoming an ever-flourishing company.In addition to operational productivity, there are many other measures typically used in organisations as part of cost accounting, which can be misleading. People in an organization behave in the way they are measured. Wrong measurements can lead to erroneous behaviours. Therefore, it is better to use the principles of <a href="https://www.vectorconsulting.in/en/research-and-publication/blogs/throughput-accounting-an-introduction/">Throughput Accounting</a> for internal decision making.

Download PDF

Can there be a case where a decrease in profitability is actually an improvement ? Read to know more.

Let's Empower Growth